Clutch Rebuild Kit Fits John Deere A AO AR

One New Aftermarket Replacement Clutch Rebuild Kit

Fits John Deere Tractor Models: A, AO, AR

Kit Contains:
(1) Facing Clutch Pulley
(1) Brake Pad Pulley
(2) Facing Clutch Disc
(3) Clutch Disc Adjusting Spring
(3) Clutch Adjusting Nut
(3) Clutch Pressure Plate Spring (Fits Belleville) Washer

Part Details:
The pulley clutch disc are 0.393″ thick. One is needed per tractor.

The floating clutch facing discs are 10″ (OD) x 0.15″ (thick) with an inner diameter of 6.75″. Two are needed per tractor.

The belt pulley brake lining is a non-asbestos lining with countersunk brass rivets.

The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. They are 1.915″ long and the wires are 0.120″ thick. There are 3 used per tractor.

The clutch adjusting nuts are 1/2″ slotted hex nuts, 20 NF, Grade 5 and three are used per tractor. They are made of Zinc.

Models This Part Fits:

A AO ARAdditional Information: (1) Facing Clutch Pulley10″ disc outside diameter0.393″ thickReplaces Part Numbers: AA5082R, AA6129(1) Brake Pad PulleyNon-asbestos lining with countersunk brass rivetsReplaces Part Numbers: AB4748R, AF4748R, RE29790(2) Facing Clutch Disc10″ outside diameter 6-3/4″ inside diameter 0.150″ thickThe side with the grooves faces the driving disc1-5/8″ lining widthReplaces Part Numbers: R90215, C614R(3) Clutch Disc Adjusting Spring1.915″ long0.740″ outside diameter0.500″ inside diameter0.120″ wire thicknessThe clutch disc adjusting spring mounts to the outer cast iron adjusting disc3 springs used per tractorReplaces Part Numbers: A352R(3) Clutch Adjusting Nut1/2″ – 20 NFGrade 5ZincSlotted hex nut, 1/2″3 used per tractorReplaces Part Numbers: B3279R, AA4967R, A335R, 14H994(3) Clutch Pressure Plate Spring (Belleville) Washer0.572″ inside diameter0.937″ outside diameter0.035″ thickSpring steelTorque initially to 15 FT pounds, then adjust as neededUse to smooth out the hand clutch engagement3 used per tractorReplaces part Numbers: JDS1626

Reference Numbers:

A352R